Your cart is currently empty!
Side Shields and Rain Shield
Wind Rain Shield and Wind Breaks.
(Check here to see if you need any brackets for your scooter)
Description
The Wind Rain Shield is the front section of the clear set up. Everything forward of the front of the seat.
The Side Shields are the 3 pcs comprising of the rear and the two sides beside the seat. Everything behind the front of the seat. Including the struts to help support the extra weight.
Please check the list of front brackets if your scooter does not have a bumper bar for the Wind / Rain Shield to attach to. An option to see this list of scooters will come up on the next screen.
(Please refer to Size combination chart for the best fit sizes for your scooter)
Additional information
| Weight | 4 kg |
|---|
Size combination chart
These are the suggested combination of side shields and wind/rain shields to use on the length of the scooter they are being fitted to. Extra wide scooters are not listed on this page.
1200mm to 1300mm Standard Side Shields / Standard Wind Rain Shield
1300mm to 1600mm Large Side Shields / Standard Wind Rain Shield
1300mm to 1600mm Standard Side Shields / Large Wind Rain Shield
1600mm or longer Large Side Shields / Large Wind Rain Shield
Standard Side shields require Standard size canopy.
Large Side shields require Large size canopy.
Struts come automatically with the side shields or the 3pce set.
Instructions
Wind/Rain Shield Instructions (Click here for pdf version)
1. Attach the #2 canopy frame to the
mobility scooter.
2. Attach the U shaped bar with the black fittings
as shown on Fig 2.
3. Attach the frame to the front of the canopy frame
as shown on Fig 3.
4. Attach the bottom of the frame to the bumper bar
or bracket using the Hose clamps provided.
5. Adjust height of the rods using sliders
on figure 4. Fit cross bar Fig2.
6. Attach clear side and rear shields with the velcro tabs folding
over the tube from the inside to the outside.
Do not overtighten
